Author: acepen

Working Principle

Graphic tablet hardware is according the principle of electromagnetic induction, during cursor positing and movement, it is completely done by electromagnetic induction. Inside the board of graphic tablet, there is a circuit board, which is also called Antenna board. There is copper line with the balanced horizontal and vertical alignment. Cut the tablet into a […]

My Pen Cannot Move The Cursor And Cannot Be Used Instead Of A Mouse. What Should I Do?

1. Check if the USB cable is normal. If the indicator light on the tablet is blinking, it indicates that it is not connected well. Please check whether the data cable is plugged in firmly or replace other USB ports on the computer. 2. Check if the computer has drivers for other brands of tablet […]

When Tablet Connects To The Computer, The Cursor Of Stylus Cannot Move.

(1). Please make sure your USB cable has connected to computer tightly? If not, please connect it. If yes, please try to unplug and re-plug it to another USB port, or change another USB cable. (2). When the stylus is far away from the sensitive height of the tablet, please check the LED light of […]

My Pen Display Shows No Signal

1.Make sure one of HDMI cable has been connected to both the pen display and computer tightly. 2.Try to test pen display with another computer. 3.If you use USB to HDMI interface converter, please make sure it is in good condition before using.

If My Pen Tablet Is Not Working, How Do I Determine Whether It Is Caused By A Hardware Or Software Malfunction?

If my pen tablet is not working, how do I determine whether it is caused by a hardware or software malfunction? If your pen tablet is malfunctioning, do the following: 1. Connect your pen tablet to a different computer. If the pen tablet functions properly then the issue is a “driver conflict” with the system […]